GMSL camera modules

Map the link first

A typical GMSL camera link includes a serializer at the camera and a deserializer at the host. Identify the sensor, serializer, connectors, cable, deserializer and processor to establish hardware boundaries and debugging responsibilities.

Information needed for selection

• Host and deserializer：Host and carrier board models, existing deserializer, available inputs and software environment.
• Camera configuration：Camera count, target resolution and frame rate, output format and modes that must run together.
• Cable assembly：Required length, cable type, connectors at both ends, adapters, bends and routing.
• Power：Separate camera power or power through the cable, input range, sequencing and system power constraints.
• Multiple cameras and synchronization：Timing between cameras, trigger source, timestamp needs and recovery requirements.
• Installation and environment：Available space, connector retention, vibration and temperature requirements, and any enclosure needs.

Prototype validation

Begin with power-up and capture on one link, then test the intended cable length, camera count and operating modes. Record hardware revisions, cable configuration, software versions and test conditions. Define separate checks for power cycling, continuous capture and recovery.

Customization topics

Discuss optics, mechanical layout, connectors, cabling, camera configuration and software tasks. Identify the host-side hardware already selected and the owners of the deserializer board, driver, image processing and system testing.